Bofa V200 kit with table clamp and extraction arm
Details
The Bofa V200 is a fume extractor for soldering and electronics work, and comes as a complete, ready-to-use kit with a table clamp and an extraction arm. The ESD-safe arm is 650mm long with a 50mm diameter, and holds its position once bent into place.
Three-stage filtration moves the fumes through a pre-filter, a HEPA filter and an activated carbon gas filter, removing 99.997% of particles down to 0.3µm as well as the gases released by flux from soldering. A blocked filter indicator on the front panel shows when the filters need to be replaced. The unit is quiet with a noise production of 54dB. The replacement pre-filters and combined filters are available separately.
Model overview
| Model | V200 | V250 |
|---|---|---|
| Inlets | 1 | 2 |
| Airflow | 90 m3/h | 180 m3/h |
| Static pressure | 2000 Pa | 3000 Pa |
| Speed control | No |
Yes |
| Noise level | <54 dB(A) | <61 dB(A) |
| Extraction arm included | Yes |
No |
| Price |
Specifications
| Power | 90 W |
| Filters | Pre-filter, HEPA filter (H14) and activated carbon gas filter |
| Filter efficiency | 99.997% of particles >0.3µm |
| Tube length | 650 mm |
| Dimensions | 42 x 29 x 27 cm |
| Weight | 10 kg |
Accessories
- Pre-filter mat (A1030102)
- Combined HEPA and gas filter (A1030099)
- Table mount installation kit
- 50mm x 650mm ESD extraction arm
- Power cable
Pros and cons
- Complete kit with table mount and extraction arm
- Three-stage filtration for particles and flux gases
- Blocked filter indicator on the front panel
- Replacement filters are sold separately
Downloads
| Bofa V200 datasheet |  (354.72 KB) | Download |
| Bofa V200 user manual | (361.84 KB) | Download |
Similar products
