GW Instek GPP-1326L power supply + load (LAN)
Details
The GPP-1326L power supply belongs to the GW Instek GPP-series and has 1 channel. This channel has an output voltage of 0-32V and an output current of 0-6A. The GPP-1326L has an LAN interface included, in contrary to the GPP-1326 without the LAN interface.
The GPP-series from GW Instek is a series of programmable power supplies with a high program resolution and read back resolution and a low-ripple. This makes the power supplies very accurate. An independent output on-off switch is provided for each channel.
The multi-channel models have an internal circuit that allows the first two channels to be connected in series or in parallel without the need for additional external wiring, providing users with convenience not only in operating procedures but also in a more stable output. The GPP-series offers a variety of display modes, including single or multi-channel setting values, measurement values, and waveform displays.It is also possible to set conditions to protect the DUT. This can be done by means of audible alarms or by automatically switching off the lab power supply at certain set values. Furthermore, this power supply has an output recorder function, which records the voltage/current to the internal memory, and the result can be stored as .REC or .CSV file. The GPP-series also has a sequential output function, which allows users to set the sequential constant voltage (CV) or constant current (CC) load waveform. There are also 8 built-in waveforms.
Electronic load
The GW Instek GPP-1326L has a load function that allows it to also be used as a load. It can draw a combined max power of 100W. The load can function in CV, CC, and CR mode. Furthermore, the function of the channel can be either set as power supply or load.
Model overview
The main differences between the models of the GPP-series are shown in the table below.
| Model | GPP-1326 | GPP-2323 | GPP-3323 | GPP-4323 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Channels | CH1 | CH1 | CH2 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH4 |
| Output voltage | 0-32V | 0-32V | 0-32V | 0-32V | 0-32V | 1.8-5V | 0-32V | 0-32V | 0-5V | 0-15V |
| Output current | 0-6A | 0-3A | 0-3A | 0-3A | 0-3A | 5A | 0-3A | 0-3A | 0-1A | 0-1A |
| Resolution | 1 mV / 0.2 mA | 1 mV / 0.1 mA | 1 mV / 0.1 mA | 1 mV / 0.1 mA | ||||||
| Price | ||||||||||
Specifications
| Load | |
| Total power | 100 W |
| Inputs | 1 |
| Voltage range | 1.5 V - 33 V |
| Current range | 0 - 6.2 A |
| Resistance range | 1 Ω - 1 KΩ |
| Resolution | 10 mV / 0.1 mA / 1 Ω |
| Ripple | ≤ 500 μVrms / 4mArms |
| Load function | Constant voltage, current, resistance |
| Built-in waveforms | Sine, pulse, ramp, stair up, stair down, stair updown, exponential rise, exponential fall |
| Interfaces | RS-232, USB, LAN |
| Display | 4.3" TFT LCD Display |
| Dimensions | 213 x 145 x 312 mm |
| Weight | ~ 7.5 kg |
Accessoires
The GPP-1326L power supply comes with the following accessories:- Power cord
- Test leads
- Declaration of traceable calibration
Pros and cons
- Electronic load function
- Includes LAN interface
Downloads
| DTC sample |  (126.04 KB) | Download |
Similar products
