599.4

Regular Price: €666.00

Now: €599.40 Excl. VAT

Loading stock info
  •  
Product number: ELE002716

Be the first to review this product

10% discount on all GW Instek products!

Details

The GPP-4323 power supply belongs to the GW-Instek GPP-series and has 4 channels. The first two channels have an output voltage of 0-32V and an output current of 0-3A. The third channel has an output voltage of 1.8/2.5/3.3/5.0V and an output current of 1A, and the fourth channel has an output voltage of 0-15V and an output current of 0-1A.

The GPP-series from GW-Instek is a series of programmable power supplies with a high program resolution and read back resolution and a low-ripple. This makes the power supplies very accurate. An independent output on-off switch is provided for each channel.

The multi-channel models have an internal circuit that allows the first two channels to be connected in series or in parallel without the need for additional external wiring, providing users with convenience not only in operating procedures but also in a more stable output. The GPP-series offers a variety of display modes, including single or multi-channel setting values, measurement values, and waveform displays. It is also possible to set conditions to protect the DUT. This can be done by means of audible alarms or by automatically switching off the lab power supply at certain set values. Furthermore, this power supply has an output recorder function, which records the voltage/current to the internal memory, and the result can be stored as .REC or .CSV file. The GPP-series also has a sequential output function, which allows users to set the sequential constant voltage (CV) or constant current (CC) load waveform. There are also 8 built-in waveforms.

Electronic load

The GW Instek GPP-4323 has a load function that allows CH1 and CH2 to also be used as a load. CH1 and CH2 can draw a combined max power of 50W. The load can function in CV, CC, and CR mode. Furthermore, the function of both channels can be chosen independently allowing for the use of 2 power supplies, 1 power supply & 1 load, or 2 loads.

Model overview

The main differences between the models of the GPP-series are shown in the table below.

Model GPP-1326 GPP-2323 GPP-3323 GPP-4323
Channels CH1 CH1CH2 CH1CH2CH3 CH1CH2CH3CH4
Output voltage 0-32V 0-32V0-32V 0-32V0-32V1.8-5V 0-32V0-32V0-5V0-15V
Output current 0-6A 0-3A0-3A 0-3A0-3A5A 0-3A0-3A0-1A0-1A
Resolution 1 mV / 0.2 mA 1 mV / 0.1 mA 1 mV / 0.1 mA 1 mV / 0.1 mA
Price 471.6 Regular Price: €524.00 Now: €471.60 Excl. VAT 505.8 Regular Price: €562.00 Now: €505.80 Excl. VAT 565.2 Regular Price: €628.00 Now: €565.20 Excl. VAT 599.4 Regular Price: €666.00 Now: €599.40 Excl. VAT

Specifications

Load specifications
Total power50 W
Inputs2
Voltage rangeCH1: 1.5 V - 33 V
CH2: 1.5 V - 33 V
Current rangeCH1: 0 - 3.2 A
CH2: 0 - 3.2 A
Resistance rangeCH1: 1 Ω - 1 KΩ
CH2: 1 Ω - 1 KΩ
Resolution10 mV / 0.1 mA / 1 Ω
Ripple ≤ 350 μVrms / 2mArms
Load modeCV, CC, CR
Built-in waveformsSine, pulse, ramp, stair up, stair down, stair updown, exponential rise, exponential fall
Interfaces RS-232, USB
Display 4.3" TFT LCD Display
Dimensions 213 x 145 x 312 mm
Weight ~ 7.5 kg

Options

LAN Note! If you wish to order the GPP-4323 inlcuding LAN card you can only order it on the following product page.
With this option the GPP- series power supplies are extended with a LAN connection. This option is installed by the manufacturer.

GPP-4323 incl. LAN

GW Instek GPP-4323 power supply + load incl. LAN module
630

Regular Price: €700.00

Now: €630.00 Excl. VAT

Info
GPIB With this option the GPP- series power supplies are extended with a GPIB connection. This option is installed by the manufacturer.

GPIB

GW Instek GPP-series GPIB card
126

Regular Price: €140.00

Now: €126.00 Excl. VAT

Info

Accessoires

The GPP-4323 power supply comes with the following accessories:
  • User manual
  • Power cord
  • Test leads

Pros and cons

  • Electronic load function

Downloads

Similar products

Rigol DP832A power supply
599 €599.00 Excl. VAT