No-clean gel flux 11g

This gel flux is a 'no clean' gel that can be applied from a syringe. The gel is intended for surface mount assembly and repair. As long as it is not washed off, the flux remains in place during the soldering process. Gel flux has a relatively long action and is therefore excellent for drag soldering (a soldering iron with a large hollow tip filled with tin moving along the pins).

This gel comes in a 11g syringe, without plunger (pusher). Although it's intended for pneumatic paste dispensers, you can buy a plunger separately and you will find it here. Please note that this plunger can only be used to push and is not locked in place (it will fall out easily). We sell flux for manual dispensing as well. If you use the syringe without a needle, it will give off a caterpillar. Optionally you can buy a needle, you can find needles here. Choose the thickest needle. It takes a lot of power to use the 11g gel with needle, without a needle it takes much less effort.

Specifications

Do you think 11g is too much? Then you could also choose the 1.5g variant. If you need a larger pack, see the 14g variant with included plunger.