Weller ZERO-SMOG-4V fume extractor kit with 2 nozzles
Details
The Weller ZERO-SMOG-4V fume extractor kits are 230m³/h, 3800Pa extractors suitable for removing fumes for up to 4 workstations and come in two variants. This one has nozzles for the fume extraction. The other uses funnels.
The extractor comes equipped with a HEPA H13 particle filter and a fine dust pre-filter F7, to ensure the air is cleaned from hazardous vapors, particles and viruses. The electronic filter control warns with both visual and audible alarms whenever filters need to be replaced. It is remote controlled with a PC via the RS232 connection and the airflow efficiency can be tested via the USB connection. The included Constant Flow Control (CFC) function regulates the fume extraction for each connected workstation.
Please note. The Weller WT HUB is needed if the Weller ZERO-SMOG-4V kit is to be directly controlled by a WX or WT soldering station.
Specifications
| Inlets | 2 |
| Power | 275 W |
| Airflow | 230 m³/h |
| Speed control | RS232 remote control |
| Noise level | 48 dBA |
| Filters | Fine dust pre-filter F7 + HEPA H13 particle filter |
| Filter efficiency | 99.95% of particles >0.3μm |
| ESD safe | Yes |
| Tube length | 1.0 m |
| Dimensions | 345 x 325 x 505 mm |
| Weight | 19 kg |
Accessories
The ZERO-SMOG-4V kit with 2 nozzles comes by default with:
- 1x Extraction unit
- 1x Compact filter H13
- 1x Fine dust filter F7
- 2x Kit 1 WF slanted nozzle
- Easy-Click 60 extraction arm 1.0 m
- Easy-Click 60 shut-off valve
- Easy-Click 60 extraction hose 3.0 m
- Easy-Click 60 slanted nozzle FT-NL
- 2x Hose connection (straight)
Pros and cons
- Up to 4 workstations can be connected
- Flexible tube, so it does not hold position
Downloads
(164.41 KB)Similar products
