The Siglent SNA5000A series Vector Network Analysers is a series high end analysers with a frequency range of 9kHz-4.5/8.5GHz.
These analyser s can be used to determine the performance of a.o. RF-/microwave equipment by calculating the reflection and transmission coefficients.
To do this these analyser s support 2-/4-ports (depending on physical amount of ports) scattering-, differential- and time-domain parameter measurements.
With these vector network analyser s also the Q-factor, bandwidth and insertion loss of a filter can be determined. Furthermore, they
feature impedance conversion, movement of measurement plane, limit testing, ripple testing, fixture simulation and adapter removal/insertion adjustment functions.
The SNA5000A series features a big 12.1" touch-screen on which multiple measurement windows can be displayed at the same time. Measurement data from memory can be compared to current data and the analyser s have a data hold function. Furthermore, the analyser has a HDMI video output and can be remote controlled by using a USB- or webserver connection.
|Bandwidth||9 kHz - 4.5 GHz||9 kHz - 4.5 GHz||9 kHz - 8.5 GHz||9 kHz - 8.5 GHz|
|Frequency resolution||1 Hz|
|Power resolution||0.05 dB|
|IFBW||10 Hz - 3 MHz|
|Dynamic range||125 dB|
|Output power range||-55 - +10 dBm|
|Max. input level||+10 dBm|
|Noise floor||< -125 dBm/Hz|
|Interfaces||USB-A, USB-B, LAN, HDMI|
|Display||12.1" TFT LCD touch-screen (1280x800)|
|Dimensions||378 x 284 x 126 mm|
|Calibration types||Response calibration, Enhanced Response calibration, |
Full one port calibration, Full two port calibration,
Full three port calibration, Full four port calibration,
|Measurement types||Scattering parameter measurement, differential parameter
receiver measurement, time domain parameter analysis,
limit test, ripple test, impedance conversion, fixture simulat ion ,
adapter removal/insertion enhanced time domain parameter analysis (TDR)
|Mechanical Calibration Kit||Open load|
Phase matched load (50 Ω)
|VNA utility kit||1x N (Male) - SMA (Male) cable|
1x N(Male) - N(Male) cable
2x N (Male) - BNC (Female) adapter
2x N (Male) - SMA (Female) adapter
1x 10 dB attenuator
The SNA5002A comes by default with: