The Miniware MDP-L1060 is a compact DC electronic load with 100W load input. It can go up to 60V and 10A with a resolution of 10mV/mA. The module can be used on its own or it can be controlled by the MDP-M01 display control module to connect it to other loads in the MDP series to stack them together.
With the controller, the MDP-L1060 can achieve a resolution of up to 1mV/1mA and also enables advanced functions such as battery test, internal resistance test, factory test, dynamic test and over-current protection test. The electronic load has Constant Current, Constant Voltage, Constant Resistance and Constant Power modes. The device has a built-in battery that can work as an emergency power supply to keep testing in case of an emergency power cut. The battery can be charged via a USB type-C interface which can be used to charge a power bank for long-term field testing and also to program the electronic load.
Furthermore, the electronic load has many safety protections such as OVP, OCP, OPP, OTP, UVP and anti-reverse protection. Finally, the load supports remote control via a 2.4G wireless connection which can be used to connect the device to the MDP-M01 and other Miniware MDP series electronic loads to create a larger electronic load without using up too much space.
Specifications
| Power | 100 W |
| Input Voltage range | 0.1 - 60 V |
| Input Current range | 15 mA - 10 A |
| Input Resistance range | 10 mΩ - 4 kΩ |
| Input Power range | 3 mW - 100 W |
| Resolution | 10 mV / 1 mA / 10 mΩ / 10 mW |
| Static modes | CV, CC, CR, CP |
| Protection | OPP, OCP, OVP, OTP, UVP, anti-reverse |
| Interfaces | USB-C, WIFI |
| Battery capacity | 650 mAh |
| Power input | DC 5 V, 2 A |
| Dimensions | 112 x 65.5 x 35 mm |
| Weight | 330 g |
Accessories
The Miniware MDP-L1060 electronic load comes with:
- 1x XT30 female connector
- 2x 4.0 mm banana to alligator cables - Black and Red
Pros and cons
- Stackable design to create larger electronic load
Downloads
(26.23 MB)
