The SigOFIT MOIP800P is an isolated probe from Micsig that can measure small and large voltages, with a bandwidth of 800 MHz and a common mode up to 85kVpk. With this probe it becomes very easy to measure a gate signal at a high-side FET or IGBT at 600V or even at 1200V, which previously was almost impossible. This probe is indispensable for the development of circuits with SiC & GaN technology, as it suppresses the oscillation caused by high-frequency common-mode noise without the use of redundant components. Furthermore, the MOIP800P has a very low input impedance of <1pF, a very high common mode rejection ratio up to 180dB and a very accurate DC gain of 1%.
There are multiple attenuator tips available to test differential mode signals from ±500mV-±5000V. Thanks to the calibration button on the Micsig SigOFIT probes, sending them in for calibration is no longer necessary.
Model overview
We offer 6 different models of the SigOFIT probe, which differ in bandwidth, attenuation, rise time and output voltage:
| Model |
Bandwidth |
Rise time |
Output voltage |
Included attenuator tip |
Price |
|---|
| MOIP100P
|
100 MHz |
≤ 3.5 ns |
± 1.25 V |
20x attenuator tip |
2307
€2,307.00
Excl. VAT
|
| MOIP200P
|
200 MHz |
≤ 1.75 ns |
± 1.25 V |
20x attenuator tip |
2999
€2,999.00
Excl. VAT
|
| MOIP350P
|
350 MHz |
≤ 1 ns |
± 1.25 V |
20x attenuator tip + 1000x attenuator tip |
4999
€4,999.00
Excl. VAT
|
| MOIP500P
|
500 MHz |
≤ 700 ps |
± 500 mV |
50x attenuator tip + 2000x attenuator tip |
8999
€8,999.00
Excl. VAT
|
| MOIP800P
|
800 MHz |
≤ 438 ps |
± 500 mV |
50x attenuator tip + 2000x attenuator tip |
11110
€11,110.00
Excl. VAT
|
| MOIP1000P
|
1 GHz |
≤ 350 ps |
± 500 mV |
50x attenuator tip + 2000x attenuator tip |
16999
€16,999.00
Excl. VAT
|
Specifications
| System noise | <450 μVrms |
| Propagation delay | 16 ns |
| DC gain accuracy | 1% |
| Common mode voltage range | 85 kVpk |
| Max input voltage (with max attenuation tip) | 5000 V |
| Cable length | 2 m |
| Weight | 2.2 kg |
Attenuation
| Attenuator tip | Interface | Attenuation | Differential voltage range | Imput impedance | Price |
| OP20-1G
| MMCX | 20X | ± 10 V | 4.47 MΩ / 4 pF |
1499
€1,499.00
Excl. VAT
|
| OP50-1G
| MMCX | 50X | ± 25 V | 4.19 MΩ / 2 pF |
1499
€1,499.00
Excl. VAT
|
| OP1000-1G
| MCX | 1000X | ± 500 V | 20.94 MΩ / 1 pF |
1499
€1,499.00
Excl. VAT
|
| OP2000-1G
| MCX | 2000X | ± 1000 V | 20.52 MΩ / 1 pF |
1499
€1,499.00
Excl. VAT
|
| OP5000-1G
| MCX | 5000X | ± 2500 V | 40.92 MΩ / 1 pF |
1599
€1,599.00
Excl. VAT
|
| OP10000-1G
| LCX | 10000X | ± 5000 V | 40.82 MΩ / 2.4 pF |
1999
€1,999.00
Excl. VAT
|
Accessories
The MOIP800P comes with:
- 1x Probe mount
- 1x Power supply
- 5x MMCX connector
- 5x MCX connector
- 1x MMCX cable
- 1x MCX cable
- 1x OP50-1G attenuator tip
- 1x OP2000-1G attenuator tip
- 1x Suitcase
Pros and cons
- DC gain accuracy of 1%
- No warm-up time
- Auto-calibration in just 1 second
Downloads
(1.11 MB)
