JBC PHNE-2KA IR preheater set nano

The JBC PHNE-2KA IR preheater set is, as suggested by its name, intended to preheat PCBs or components. This is a complete set consisting of the PHNE IR preheater and console, PHN-SA preheater support, PH218 Thermocouple type K and Kapton tape.

The main function of a preheater is to reduce the thermal shock that can be caused by direct (de)soldering. The PHNE-2KA thus acts as a secondary heat source and is designed for small PCBs. As you are used to from JBC, this set is also of the highest quality. For example, 3 standard temperature profiles have already been installed and 20 custom temperature profiles can be designed and used. These custom profiles can be set with 6 steps in temperature. The preheater features a single zone with a working area of 108 x 70 mm. The temperature can be set between 50 ℃ and 250 ℃, and can be measured very accurately through a thermocouple. There are 2 type-K ports available to measure the temperature on different surfaces or components.

The PHNE-2KA preheater support can also be used separately from the preheater as an aid during soldering and desoldering. The Kapton tape comes in handy when attaching the thermocouple to the circuit board or component. By means of the various interfaces, the preheater can for example be connected to the JBC traceability system or a pedal. The console can be used to monitor and control the temperature and is equipped with a USB port.

Model overview

Specifications

Accessories

The PHNE-2KA comes by default with:

• 1 x PHNE IR Preheater
• 1 x ACE-A Console
• 1 x PHN-SA nano PCB support
• 1 x PH217 Kapton tape
• 2 x PH218 Thermocouple Type K
• 1 x RJ45 Cable
• 1 x Power cord