Miniware MDP-P906 power supply
Details
The Miniware MDP-P906 power supply can deliver up to 300W output power. It can go up to 30V and 10A with a resolution of 10mV/2mA. The power supply can be used on its own or it can be controlled by the MDP-M01. With the controller the power supply can also achieve a resolution of up to 1mV/1mA. While you can set the parameters manually you can also use one of the 10 pre-programmed parameters, which can also be changed when you connect it to a PC. With the ability to put them in series or parallel, you can create a stronger power supply without giving up too much space. The input power is between 4.2 V and 30 V (can drop down to 2.7 V after start-up) and does not support main voltage in contrast to normal power supplies, be aware that a power source is not included. Due to its high power but small size, there is an included fan for cooling.
Specifications
| Input | 4.2 V - 30 V 100 mA - 14 A Quick charge 3.0 |
| Total power | 300 W |
| Outputs | 1 |
| Voltage range | 0 - 30 V |
| Current range | 0 - 10 A |
| Resolution | 10 mV/2 mA |
| Ripple | 0.25 mV/2 mA |
| Protection | Input OVP, UVP, Reverse connection protection Output OTP, OCP, Backflow protection |
| Interfaces | USB, WIFI |
| Dimensions | 112 x 66 x 20 mm |
| Weight | 181 g |
Accessories
The MDP-P906 comes with:
- 2 x 4mm banana to alligator clip cables
Pros and cons
- 300W output power
- Small size
- Adapter not included
Downloads
| MDP-P906 manual |  (11.4 MB) | Download |
Video's
Similar products
