This Sensepeek (4005) product comes with 4 Sensepeek SP10 (10 MHz probes), 4 extra test needles, 5 dupont to dupont test wires, and 2 banana to dupont test wires.
These Sensepeek probes are truly the first of its kind. With its minimalistic design and spring-loaded test needle, these hands-free probes allow the user to easily make instant measurements and preform prolonged triggering sessions. The probe is very flexible and sturdy which saves time and frustration on getting the correct setup ready. The SP10 comes with a powerful magnet in the base similar to all the other Sensepeek probes and holders, which makes the probe easy to place and reposition on the metal base plate. Unfortunately, the SP10 probes only have one attenuation ratio of 1:1.
If you do not own a metal base plate yet, you can look at the Sensepeek 4007. For a complete SP10 probe kit you can look at the Sensepeek 4003. For probes with a different bandwidth and attenuation ratio you can look at the SP100 (100 MHz probe) or the SP200 (200 MHz probe).
The specifications for the SP10 probes are listed in the table below.
Bandwidth | 10 MHz |
Rise time | 34 ns |
Attenuation | 1:1 |
Needle resistance | 0,02 Ω |
Max. input voltage | ±60 V(DC) / 30 V(AC RMS) |
Cable length | 80 cm |
Probe tip diameter | 0,5 mm |
The Sensepeek 4005 comes with:
Sensepeek SP10 manual |
(710.67 KB) | Download |