This Signal Generator Combo by RF explorer is a step up from the baseline model. Same as the baseline this is a compact signal generator with a frequency range up to 6 GHz. Unlike the baseline model, this models bandwidth starts at 100 kHz. As visible in the images, the signal quality of this generator is much higher as well. This generator can generate CW and sweep signals. When connected to a PC, the generator can be fully programmed with the RF Explorer for Windows Software tool.
The RF Explorer signal generator can work as a powerful tracking generator when connected to the same PC together with an RF Explorer spectrum analyzer, with full Scalar Network Analyzer (SNA) capabilities. The SNA feature allows for full characterization of filters, amplifiers and 2-port RF devices.
You can download the required software, firmware and manual on the site of the manufacturer.
Optionally, its possible to upgrade the baseline model to the specs of this one. Please contact us if you would like to know more.
Frequency range | 100 kHz - 6 GHz |
Resolution | 1 kHz |
Frequency stability | 0.5 ppm |
Function generator | CW and sweep signals, and tracking generator |
Output power | -40 to +10 dBm |
Output resolution | 0.25 dB |
RF connector | 50 Ω |
Display | LCD, 128 x 64 pixels |
Interfaces | USB 2.0 |
Weight | 185 gram |
Dimensions | 113 x 70 x 25 mm |
The RF explorer signal generator comes with:
RF Explorer signaalgenerator combo |
(2.47 MB) | Download |
RF Explorer comparison chart |
(426.17 KB) | Download |