The Quick 7610 is a BGA rework station that can automate soldering, removal or repair processes using different profiles. These profiles make repeatable tasks much easier since they can automatically move the heater in the same exact vertical position every time. The station also has a laser to mark the exact soldering point.
This particular rework station does not use hot air to rework the solder but uses a preheater from the bottom and infrared from the top to ensure proper and precise heat distribution. This eliminates the use of nozzles. Although there is software available via the RS-232 port, it is not really needed since the Quick can be fully configured on the device itself.
Output power | 2400 W |
Top heating power | 720 W |
Bottom preheater power | 1600 W |
Bottom radiation preheating size | 260 x 260 mm |
Infrared temperature sensor | 0 - 300 °C |
Max. circuit board size | 420 x 400 mm |
Connectivity | Standard RS-232 C |
Dimensions | 800 x 580 x 520 mm |
Weight | 54 kg |
Quick 7610 user manual |
(3.52 MB) | Download |