This Miniware MPD-P905 power supply can deliver up to 90W output power. It can go up to 30V and 5A with a resolution of 10mV/2mA. The power supply can be used on its own or it can be controlled by the MDP-M01. With the controller the power supply can also achieve a resolution of up to 1mV/1mA. While you can set the parameters manually you can also use one of the 10 pre-programmed parameters, which can also be changed when you connect it to a PC. With the ability to put them in series or parallel, you can create a stronger power supply without giving up too much space. The input power is between 4.2 V and 30 V (can drop down to 2.7 V after start-up) and does not support main voltage in contrast to normal power supplies, be aware that a power source is not included. For a compatible adapater, see this 24V 4A DC adapter. With this adapter the power supply will not reach its full output power. Due to the low power it uses passive cooling unlike the MDP-P906 which needs a fan due to its high power.
Model | MDP-P905 | MDP-P906 |
---|---|---|
Power | 90 W | 300 W |
Voltage | Range: 0-30 V | Range: 0-30 V |
Current | Range: 0-5 A | Range: 0-10 A |
Resolution | 10 mV / 2 mA | 10 mV / 2 mA |
Price |
Input | 4.2 V - 30 V 100 mA - 6 A Quick charge 3.0 |
Total power | 90 W |
Outputs | 1 |
Voltage range | 0 - 30 V |
Current range | 0 - 5 A |
Resolution | 10 mV/2 mA |
Ripple | 0.25 mV |
Protection | Input OVP, UVP, Anti-reverse conn protection, Anti-backflow protection Output OTP, OCP |
Interfaces | USB, WIFI |
Dimensions | 107 x 66 x 13.6 mm |
Weight | 143 g |
The MDP-P905 comes with:
Miniware MDP-P905 Manual |
(10.8 MB) | Download |