The Micsig MS-A-008 probe is a set for measuring malfunctions in engines. The probe has to be connected to an oscilloscope for reading out signals. The purpose of the probe is to help diagnose problems in the engine ignition system. The probe can be attached to a spark-plug but pay attention that you connect the probe to the isolated wire of the spark-plug and not directly to the plug itself. This is to prevent fire or electric shocks. To make sure no interference occurs keep the probe at a minimal distance of 5cm from any high-voltage conductors.
|Connector A||BNC 16.5mm|
|Connector B||Clamp: width 25mm, opening 20mm|
|Ground cable length||0.55m|