The Fluke 177 is a rugged digital handmultimeter with a 6000 count display and a basic accuracy of 0.09%. Besides the standard and true RMS functions for measuring volts, ohms and amperes, also capacity and frequency measurements can be made.
Furthermore, there is a diode test function and it is possible to check continuity. In addition to the numerical display, the underside of the display is equipped with a
analogue graph also shows the measured value.
This meter has Display Hold and Auto Hold functions and is capable of Min/Max/Average registration. This meter also flattens the measurements so that rapidly fluctuating
signals can be read more stable.
At the back of the meter there is a folding stand and the display is large and easy to read.
The FLuke 177 uses a 9V block battery, with which you can use it for about 200 hours.
Furthermore, this meter falls in the measurement category CAT IV to 600V and CAT III to 1000V.
Specifications
| Max. DC voltage (max. resolution) | 1000 V (0.1 mV) |
| Accuracy | 0.09%+2 |
| Max. AC (max. resolution) | 1000 V (0.1 mV) |
| Accuracy | 1.0%+3 |
| Max. DC current (max. resolution) | 10 A (0.01 mA) |
| Accuracy | 1.0%+3 |
| Max. AC current (max. resolution) | 10 A (0.01 mA) |
| Accuracy | 1.5%+3 |
| Max. resistance (max. resolution) | 50 MΩ (0.1 Ω) |
| Accuracy | 0.9%+1 |
| Max. capacitance (max. resolution) | 10,000 μF (1 nF) |
| Accuracy | 1.2%+2 |
| Max. frequency (max. resolution) | 100 kHz (0.01 Hz) |
| Accuracy | 0.1%+1 |
| Other measurements | Continuity- and diode test |
| True-RMS |
Yes
|
| Display | 3 1/2 digits, 6000 counts |
| Battery | 9 volt (±200 uur working time) |
| Input security | 1000 V CAT III, 600 V CAT IV |
| Dimensions | 43 x 90 x 185 mm |
| Weight | 420 g |
More information can be found here under the datasheet and manual of the Fluke 177.
Calibrated version
Accessories
- 9V battery
- TL75 measurement cables
- Manual
Downloads
(763.85 KB)
