Fluke 115 True RMS multimeter - Calibrated

Calibration information

This multimeter is calibrated to factory standards in a Dutch lab. Of course Fluke also calibrated the meter during production and found it to be good, but for traceability and extra security it is important for many companies to have a recent and independent calibration report of the meter. You will receive a recent and traceable calibration certificate, i.e. that the measurement values obtained can be substantiated and ultimately (including uncertainties) traceable to the SI units such as Volt, Ampere, seconds, etc. The calibration takes place in a conditioned room in terms of humidity and temperature; only when the meter is used in similar conditions can the values be guaranteed. Should you wish to recalibrate the meter after one year, you can easily arrange this yourself via https://www.toolscan.eu/nl/. On this portal you can also save your certificates and view the history per instrument. In addition to this (simpler) traceable calibration, there is also the accredited calibration in accordance with ISO 17025. With such a calibration there are additional requirements to the used equipment, circumstances and personnel. This involves higher costs, and in most cases is not necessary. If you would like to have an accredited calibration we can also provide this at an additional cost, please contact us.

Designed by electricians, manufactured by Fluke. The Fluke 115 is a compact True-RMS meter for field service technicians. Thanks to its large number of functions, this multimeter offers the perfect solution for a wide variety of electrical and electronic test applications. Besides the standard current and voltage measurements, this multimeter can also measure resistance, capacitance, frequency and continuity, and can perform diode tests.
The large display with white LED background lighting makes this multimeter also very suitable for use in dimly lit environments. In addition, the compact ergonomic design makes it very easy to use this multimeter with just one hand.

Specifications

Measuring range and accuracy
Max. DC Voltage 600 V (± 0.5% + 2) Max. AC Voltage 600 V (± 1.0% + 3) True-RMS Max. DC Current 10 A (± 1.0% + 3) Max. AC Current 10 A (± 1.5% + 3) True-RMS Resistance 0.1 Ω ~ 40 MΩ (± 0.9% + 1) Capacitance 1 nF ~ 9.999 µF (± 1.9% + 2) Frequency 0.01 Hz ~ 50 kHz (± 0.1% + 2) When measuring currents, values up to 20 A can be measured for max 30 seconds. Afterwards the meter needs to cool for at least 10 minutes.
Input protection	IEC 61010-1 600 V CAT III, Pollution Degree 2
Display	6,000 counts
Battery lifespan	~400 hours
Dimensions	167 x 84 x 550 mm
Weight	550 g

Please consult the data sheet below for more information.

Accessories

The Fluke 115 will standard be delivered with:

• 1x test lead set
• 9V battery
• Holster
• User manual