11350

Regular Price: €16,217.00

Now: €11,350.00 Excl. VAT

Loading stock info
  •  
Product number: ELE004514

Be the first to review this product

This product is temporarily reduced in price until September 30th 2024!

Details

The Rohde & Schwarz ZPH-COM2 consists of:

  • ZPH cable rider .12 (2 ports model)
  • ZPH-B4 Frequency upgrade, 3 GHz to 4 GHz
  • ZPH-B22 Spectrum analyser preamplifier
  • ZPH-K1 Spectrum analysis measurement application
  • ZPH-K15 Interference analysis
  • ZPH-K16 Signal strength mapping measurement application
  • ZPH-K7 Modulation analysis
  • ZPH-K9 Power sensor support
  • ZPH-K19 Channel power meter
  • ZPH-K29 Pulse measurements with power sensor

If you need a specific configuration, please contact us and we will arrange the product in the desired configuration.

The Rohde & Schwarz Cable Rider ZPH-COM2 is a two-port handheld cable and antenna analyser. It has all the essential measurement capabilities required for installing and maintaining antenna systems out in the field. Its unique features ensure fast and efficient cable and antenna measurements and spectrum analysis. It features a large colour touchscreen and large keypad designed for extra convenience.

This model differs from the regular model in a few ways. The single-port model has DTF, reflection measurement and single-port cable loss CAT functionality, but the two-port model features even more. Not only does it support two-port transmission measurements, it also features spectrum and interference analysis. Furthermore, it has the ability to demodulate AM, FM, ASK and FSK signals. To top it off with signal strength mapping, this product packs a lot of features in its compact handheld design. Combined with a 9-hour battery life and ruggedised housing (IP51), it is perfectly suited to survive field use conditions.

You can hook up the ZPH to a commercially available wireless router (not included) and use apps on your phone or tablet to remote control the analyser. More traditional USB connection is also an option. The required driver comes with the R&S InstrumentView software package.

Specifications

Frequency5 kHz to 3 GHz (or 4 GHz with B4&K1 option)
Resolution1 Hz
Display7” touch WVGA, 800x480
DANL (with K1 option)typ. < -135 dBm at 1 MHz to < -161 dBm at 3 GHz
S11 measurement speed0.3 ms/point
Max DC input voltage50 V
Battery (HA-Z306 option)72 Wh (up to 9 hours)
Dimensions202 x 294 x 76 mm
Weight2.5 kg

For more specific details, reference the datasheet below.

Accessories

The following is included with the product:

  • Lithium-ion battery pack
  • USB cable
  • AC power supply
  • Manual
  • Side strap

Pros and cons

  • Fastest measurement speed, boot and warm-up times
  • No calibration required
  • Wizard function
  • Long battery life
  • App for Android and iOS

Video's

Product video thumbnail

Downloads