These handy little handheld oscilloscopes have 1 channel and a small bandwidth, but here's the price too. For only you have a 200 kHz scope that can be connected to a 9V battery or any power supply between 8 and 10 Volts. The oscilloscope has a 2.4" color screen and a 12-bit vertical resolution. Furthermore, the scope offers a test signal output of 1 KHz.
What is special about this scope is that you have the choice whether you want to solder it yourself or not. We sell it both assembled and still to be soldered. In the soldering variant, approximately 40 through-hole components need to be soldered. The SMD components are already in place. All components in the kit are factory checked for function and if the kit is soldered properly, the meter should also be functional.
Please note, there is still a loose power supply needed for this product. This power supply can be supplied with a 9V battery with this cable or with the optional 9 V DC adapter
Channels | 1 |
Bandwidth | 200 kHz |
Sample rate | 1 MSa/s |
Vertical resolution | 12 bits |
Memory | 1024 points |
Sensitivity | 5 mV/div - 20 V/div |
Maximum input voltage | 50 Vpp |
Screen | 2.4" color TFT LCD (320x240) |
Power supply | 8 - 10 VDC, 120 mA |
Weight | 100 g (without cables or power supply) |
Dimensions | 115 mm x 75 mm x 22 mm |
Kit
Assembled
There are copies of this product in circulation, but the version we sell is the original. You can check this with the information in the PDF below.
DSO150 Manual |
(6.03 MB) | Download |