JBC PHSE-2KB IR preheater set small

The JBC PHSE-2KB IR preheater set is, as its name suggests, intended to preheate PCBs or components. This is a complete set consisting of the PHSE IR preheater and console, PHS-SA IR preheater support, PH218 termocouple type K and Kapton tape. The main function of a preheater is to reduce the thermal shock that can be caused by direct (de)soldering. The PHSE-2KB thus acts as a secondary heat source and is designed for small/medium-sized PCBs. As you are used to from JBC, this set is also of the highest quality. For example, 3 standard temperature profiles have already been installed and 20 custom temperature profiles can be designed and used. These custom profiles can be set with 6 steps in temperature. The preheater has 2 zones, each with a working area of 65 x 130 mm and can be heated independently from each other. The temperature can be set between 50°C and 250°C and can be measured very accurate with a thermocouple. There are 4 type-K ports available to measure the temperature on different surfaces or components.
The PHS-SA preheater support can also be used separately from the preheater as an aid during soldering and desoldering. The Kapton tape comes in handy when attaching the thermocouple to the circuit board or component. By means of the various interfaces, the preheater can be connected to, for example, the JBC traceability system or a pedal. The console can be used to monitor and control the temperature and is equipped with an USB port.

Model overview

Specifications

Accesories

The JBC PHSE-2KB is supplied including:

• PHSE IR preheater
• PHS-SA small PCB support
• 1x PH218 thermocouple type-K
• PH217 Kapton tape
• RJ45 cable
• Power cord