JBC PHBE-2KB IR preheater set large

The JBC PHBE-2KB IR preheater set is, as its name suggests, intended to preheate PCBs or components. This is a complete set consisting of the PHBE IR preheater and console, PHBS IR preheater support, PH218 thermocouple type K and Kapton tape.

The main function of a preheater is to reduce the thermal shock that can be caused by direct (de)soldering. The PHBE-2KB thus acts as a secondary heat source and is designed for medium/large-sized PCBs. As you are used to from JBC, this set is of the highest quality. For example, 3 standard temperature profiles have already been installed and 20 custom temperature profiles can be designed and used. These custom profiles can be set with 6 steps in temperature. The preheater has 2 zones, each with a working area of 180 x 277 mm and can be heated independently from each other. The temperature can be set between 50°C and 250°C and can be measured very accurately with a thermocouple. There are 4 type-K ports available to measure the temperature on different surfaces or components.

The PHBS preheater support can also be used separately from the preheater as an aid during soldering and desoldering. The Kapton tape comes in handy when attaching the thermocouple to the circuit board or component. Using the various interfaces, the preheater can be connected to, for example, the JBC traceability system or a pedal. The console can be used to monitor and control the temperature and is equipped with a USB port.

Model overview

Specifications

Accesories

The JBC PHBE-2KB is supplied including:

• PHBE IR preheater
• PHBS IR preheater support
• 1x PH218 thermocouple type-K
• PH217 Kapton tape
• RJ45 cable
• Power cord