The FA430 from Hakko is, due to high airflow, the perfect fume extractor for any task.
With three extraction modes (LOW, MEDIUM, HIGH) you can choose between an extraction volume of 191.4, 293.1 or 319.6 m³/hour.
These extraction modes have a noise level of 61 dB, 68 dB and 71 dB respectively.
The FA430 uses a pre-filter and a HEPA (High Efficiency Particulate Air) filter. These filters remove 99.97% of
all particles larger than 0.3 μm from the air. When these filters are due for replacement, this is indicated by two
lights.
The different extraction modes are suitable for multiple purposes. The LOW mode is perfect for small and quiet
workplaces where low noise is a priority. The MEDIUM mode is recommended for normal use and the HIGH mode is recommended
for locations that are influenced by the environment and where suction power is therefore a priority.
The fume extractor has two inlets. These can be used individually, one at the time, or both of them can be used
simultaneously.
Be aware! This product is only the extractor and filters. The tube set has to be ordered separately (see bottom of this page).
Specifications
Inlets |
2 |
Power |
110 W |
Static pressure |
1500 Pa |
Airflow |
191.4-319.6 m3/h (Eleshop measurement) |
Noise level |
61-71 dB (Eleshop measurement) |
Filter |
Pre- and HEPA filter (H13) |
Filter efficiency |
99.97% of particles >0.3μm
|
Dimensions |
330 x 366 x 343 mm |
Weight |
7.5 kg |
Options
C1571 duct kit |
This duct kit can be attached to the FA430 fume extractor.
| |
Spare pre-filter set |
Set of10 pre-filters for the FA430 fume extractor.
| |
Spare main filter |
Main filter for the FA430 fume extractor.
| |
Accessories
The FA430 product box contains:
- Fume extractor unit
- Pre-filter
- Main filter
- Inlet cover
- Manual