The Fluke 177 is a rugged digital handmultimeter with a 6000 count display and a basic accuracy of 0.09%. Besides the standard and true RMS functions for measuring volts, ohms and amperes, also capacity and frequency measurements can be made.
Furthermore, there is a diode test function and it is possible to check continuity. In addition to the numerical display, the underside of the display is equipped with a
analogue graph also shows the measured value.
This meter has Display Hold and Auto Hold functions and is capable of Min/Max/Average registration. This meter also flattens the measurements so that rapidly fluctuating
signals can be read more stable.
At the back of the meter there is a folding stand and the display is large and easy to read.
The FLuke 177 uses a 9V block battery, with which you can use it for about 200 hours.
Furthermore, this meter falls in the measurement category CAT IV to 600V and CAT III to 1000V.
Max. DC voltage (max. resolution) | 1000 V (0.1 mV) |
Accuracy | 0.09%+2 |
Max. AC (max. resolution) | 1000 V (0.1 mV) |
Accuracy | 1.0%+3 |
Max. DC current (max. resolution) | 10 A (0.01 mA) |
Accuracy | 1.0%+3 |
Max. AC current (max. resolution) | 10 A (0.01 mA) |
Accuracy | 1.5%+3 |
Max. resistance (max. resolution) | 50 MΩ (0.1 Ω) |
Accuracy | 0.9%+1 |
Max. capacitance (max. resolution) | 10,000 μF (1 nF) |
Accuracy | 1.2%+2 |
Max. frequency (max. resolution) | 100 kHz (0.01 Hz) |
Accuracy | 0.1%+1 |
Other measurements | Continuity- and diode test |
True-RMS | Yes |
Display | 3 1/2 digits, 6000 counts |
Battery | 9 volt (±200 uur working time) |
Input security | 1000 V CAT III, 600 V CAT IV |
Dimensions | 43 x 90 x 185 mm |
Weight | 420 g |
More information can be found here under the datasheet and manual of the Fluke 177.
Fluke 170 series manual |
(763.85 KB) | Download |
Fluke 177 Datasheet |
(894.21 KB) | Download |