Elektro Automatik EL9080-170B Electronic load is able to handle loads up to 170A, 80V with a peak power of 2400W. This is a 19", 3U rack-mounted electronic load with a lot of communication interfaces like USB-A in the front and analogue interface, USB-B, master-slave bus in the back, and an extra slot for a pluggable digital interface. Its 4.3" TFT colour touchscreen, two rotary knobs which have pushbutton functionality, and the communication ports on the rear give it an intuitive operating mode. The included waveform generator with 6 different waves and the share-bus on the back side give you a lot of options regarding testing. The share-bus provides the load to connect an extra load parallel where symmetric current distribution is needed, it also is able to be connected to a power supply to form a two-quadrant setup. This can only be done with certain series from EA like the EA-PSI/PS 9000, the other loads from EL 9000B, and the ELR 9000 series.
The main differences between the models of the EL 9000 B series are shown in the table below.
Model | EL 9080-170 B | EL 9080-340 B | EL 9080-510 B |
---|---|---|---|
Peak Power | 2400 W | 4800 W | 7200 W |
Voltage | 80 V | 80 V | 80 V |
Current | 170 A | 340 A | 510 A |
Price |
Steady Power at 21°C | 1500 W |
Resistance | 0.045 Ω - 15 Ω |
Static modes | CC, CR, CV, CP |
Protection | OPP, OCP, OVP, OTP, PF |
Interfaces | USB-A, USB-B, analogue, Master-Slave |
Display | 4.3" TFT touch screen |
Dimensions | 433 x 133 x 568 mm |
Weight | 9.0 kg |
The EL9080-170B electronic load comes with
El 9000B series manual |
(3.85 MB) | Download |