Soldering tips for Aoyue / Atten

Soldering tips for all Aoyue and Atten soldering stations with passive tips that we offer. This includes the following Aoyue soldering stations: 936, 968(A+), 937, 701(A++), 6028, 9378 and 3210; and the following Atten stations/soldering irons: ST-2065D, ST-60, ST-80, ST-8802, AT938D, AT980E, AT8586 and AT937. Do you want to know if these tips are suitable for your Aoyue/Atten station? Feel free to contact us to ask.

Choose which type of soldering tip you want to buy in the top right corner. Below is a description for each tip. Buy 4 or more tips and get a discount, also for different types of soldering tips.

0.2 mm, 0.5 mm round (this is the radius, so the diameter is 0.4 mm / 1.0 mm)

The 0.5 mm round soldering tip is suitable for general use. This tip is already small enough for coarse SMD work and also has good thermal conductivity. The 0.2 mm tips are even more tiped and suitable for the finest work. Keep in mind that tiped tips do not pass on the heat of the soldering iron as well as thick tips. Finally, there is a copper version of the 0.2 mm tip, which has an improved thermal conductivity compared to the standard tips.

1.0 mm or 3.0 mm oblique

The tips are fine tips to solder with. Because the contact surface with the soldering is relatively large, tin flows easily with these tips. The 1.0 mm is suitable for fine work and the 3.0 mm tip for more robust work.

0.8 mm, 1.6 mm or 3.2 mm chisel

Dimension A in the picture alongside is 0.8mm or 1.6mm or 3.2mm. The chisel tips are the most popular tips. The 1.6 mm tip is ideal for both through-hole and SMD soldering, the 3.2 mm tip is for more robust work. The 0.8mm tip is suitable for (not too fine) SMD work. At the 0.8 mm tip, the chisel part is so small that it may seem as if this tip is round.

1.8 mm bent

This is a soldering tip with which parts can be soldered, which is not possible with other tips. The thickness of the tip is chosen in such a way that sufficient heat is led to the tip from the soldering iron.

5.0 mm knife

This tip has a knife shape. The tip is 5.0 mm thick.

All solder tips have approximately the following dimensions at the base of the tip.